HitecAstro DC Focus V2
The new HitecAstro DC Focus V2 is designed and extensively tested to support the Skywatcher Auto Focuser and JMI focus motors. Manual focus operation is provided but it is when connected to a PC via USB-2 that the DC Focus comes into its own.
Specially written software provides very accurate control of the focus motor, indeed everything including speed, accuracy and frequency of operation is adjustable.
HitecAstro also developed an ASCOM compliant driver to compliment the DC Focus software bundle which should allow it to be used with any software which supports the ASCOM standard such as Maxim DL. CCD Soft, Focus Max etc.
Includes 12V DC Male Cigarette lighter plug for use with a suitable power source.
Software for HitecAstro DC Focus
Existing Owners – Multiple Controllers
For existing Hitec DC Focus owners who wish to add a second controller to use alongside their existing one please select the ‘Additional’ option above.
This allows you to run a second controller in parallel with the existing controller on the same PC. In every other respect HitecDCFocus2 is exactly the same as the original.
Running two of exactly the same device from the same PC is not normally possible as the USB identifier would conflict and the PC would not know which one to talk to. HitecDCFocus2 contains a separate USB identifier so that they can be run side by side.
Note you will need to install the HitecDCFocus2 software and ascom driver to control the new unit. You can find these on the Hitec Astro support page.
|Dimensions||28 × 18 × 10 cm|